Filter
Top Products
Description Selects whether a tone is heard in response to key presses.
Value Range 0–3
– 0: high
– 1: middle
– 2: low
– 3: off
Default Value 3
Web User Interface Reference Key Click Tone (Page 151)
ENDCALL_TRANSFER_ENABLE
Value Format Boolean
Description Specifies if users can press the end call soft key to complete the
transfer.
Value Range
• Y (Enable End call transfer)
• N (Disable End call transfer)
Default Value N
FOLLOW_SERVER_BELLCORE
Value Format Boolean
Description Specifies whether to follow server bell core requests.
Value Range
• Y (Follow server bell core request)
• N (Do not follow server bell core request)
Default Value Y
BUSY_ON_CALL_END
Value Format Boolean
Description Specifies whether the unit should play a busy tone when the remote
party ends the call while the call is connected.
Value Range
• Y (Enable busy on call end)
• N (Disable busy on call end)
Default Value Y
REORDER_TONE_TIM
Value Format Integer
Description Specifies the duration of the reorder tone.
Document Version 2014-05 Administrator Guide 257
5.5.1 Call Control Settings