Filter
Top Products
Category Parameter Name Ref.
SIP_403_REG_SUB_RTX
Page 313
SIP_DUAL_STACK_SDP_MODE
Page 314
AUTH_INCOMING_INVITE
Page 314
SIP_RINGIN_TIMER
Page 314
SIP_2NDPROXY_ADDR
Page 314
SIP_2NDPROXY_PORT
Page 315
SIP_2NDRGSTR_ADDR
Page 315
SIP_2NDRGSTR_PORT
Page 315
SSH Settings
Category
Parameter Name Ref.
SSH Settings
SSH_USER_NAME
Page 315
SSH_PASSWORD
Page 315
SSH_ACCESS_DISABLE
Page 316
5.2 General Information on the Configuration Files
5.2.1 Configuration File Parameters
The information on each parameter that can be written in a configuration file is shown in the tables below. The
information includes parameter name (as the title of the table), value format, description, permitted value range,
default value of each parameter, phone user interface reference, and Web user interface reference.
Note
• Configuration file templates and other information about configuration files are provided at the
Panasonic website:
http://www.panasonic.com/sip
Parameter Name
This is the system-predefined parameter name and cannot be changed.
Value Format
Each parameter value is categorized into Integer, Boolean, or String. Some parameters require a composite
form such as "Comma-separated Integer" or "Comma-separated String".
• Integer: a numerical value, described as a sequence of numerical characters, optionally preceded by a
"-" (minus)
An empty string is not allowed.
• Boolean: "Y" or "N"
• String: sequence of alphanumerical characters
Document Version 2014-05 Administrator Guide 217
5.2.1 Configuration File Parameters