Filter
Top Products
The Web user interface will operate correctly in the following environments:
Operating System Microsoft
®
Windows
®
XP or Windows 7
Web Browser Windows Internet Explorer
®
7, Windows Internet Explorer 8, or
Windows Internet Explorer 9
Language (recommended) English
Opening/Closing the Web Port
To access the Web user interface, you must open the unit’s Web port beforehand. For details, refer to the
Operating Instructions on the Panasonic Web site (® see Introduction).
For details about additional features available with direct commands, see Section 3 Phone User Interface
Programming.
Configuring Settings from the Unit
To open the unit’s Web port
1. On the Home screen, select
.
2. Press [#][5][3][4].
3. Select
Yes
.
To close the unit’s Web port
1. On the Home screen, select
.
2. Press [#][5][3][4].
3. Select
No
.
Configuring Settings from the Web User Interface
To close the unit’s Web port
1. In the Web user interface, click [Web Port Close].
2. Click OK.
Note
• The Web port of the unit will be closed automatically in the following conditions:
– The port close timer configured through the Web user interface expires (® see [Port Close
Timer] in 4.4.4.1 Web Server Settings).
– 3 consecutive unsuccessful login attempts occur.
• The Web port can be set to stay open continuously, through Configuration file programming (® see
"HTTPD_PORTOPEN_AUTO" in 5.4.5 HTTP Settings). However, please recognize the possibility of
unauthorized access to the unit by doing so.
Access Levels (IDs and Passwords)
2 accounts with different access privileges are provided for accessing the Web user interface: User and
Administrator. Each account has its own ID and password, which are required to log in to the Web user
interface.
28 Administrator Guide Document Version 2014-05
1.1.5 Web User Interface Programming