Filter
Top Products
Web User Interface Reference HTTP User Agent (Page 96)
HTTP_SSL_VERIFY
Value Format Integer
Description Specifies whether to enable the verification of the root certificate.
Value Range
• 0 (No verification of root certificate)
• 1 (Simple verification of root certificate)
• 2 (Precise verification of root certificate)
Note
• If set to "0", the verification of the root certificate is disabled.
• If set to "1", the verification of the root certificate is enabled. In
this case, the validity of the certificate’s date, certificate’s chain,
and the confirmation of the root certificate will be verified.
• If set to "2", precise certificate verification is enabled. In this
case, the validity of the server name will be verified in addition
to the items verified when "1" is set.
• If the unit has not obtained the current time, verification will not
be performed irrelevant of this setting. In order to perform
verification it is necessary to first set up the NTP server.
Default Value 0
5.4.6 Time Adjust Settings
NTP_MODE
Value Format Integer
Description Specifies the NTP synchronization mode.
Value Range 0-2
– 0: Disable NTP
– 1: Automatically (NTP server assigned by DHCP server)
– 2: Manually (assigned via prov/web)
Default Value 0
NTP_ADDR
Value Format String
Description Specifies the IP address or FQDN of the NTP server.
Value Range Max. 127 characters (IP address in dotted-decimal notation or FQDN)
Default Value Empty string
Web User Interface Reference NTP Server Address (Page 105)
250 Administrator Guide Document Version 2014-05
5.4.6 Time Adjust Settings