Filter
Top Products
CW_TONE1_GAIN
Value Format Integer
Description Specifies the gain, in decibels, of call waiting tone 1.
Value Range (-80)–0
Default Value 0
CW_TONE1_RPT
Value Format Boolean
Description Specifies whether call waiting tone 1 is repeated.
Value Range
• Y (Repeat)
• N (No Repeat)
Default Value Y
CW_TONE1_TIMING
Value Format Comma-separated Integer
Description Specifies the pattern, in milliseconds, of call waiting tone 1 using up to
10 whole numbers (on 1, off 1, on 2, off 2…) separated by commas.
Value Range 0–16000 (0: Infinite time)
Note
• Avoid setting 1–50 for any of the values.
Default Value 120,120,120,120,120,14400
BELL_CORE_PATTERN1_TIMING
Value Format Comma-separated Integer
Description Specifies the cadence, in milliseconds, of pattern ID 1, described in the
LSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section 14,
using up to 8 whole numbers (on 1, off 1, on 2, off 2…) separated by
commas.
Value Range 0–5000 (0: Infinite time)
Note
• Avoid setting 1–50 for any of the values.
Default Value 2000,4000
Document Version 2014-05 Administrator Guide 273
5.5.6 Tone Settings