Filter
Top Products
Default Value Auto Negotiation
4.3.4.2 LLDP Settings
Enable LLDP
Description Selects whether to enable or disable sending and receiving LLDP
frames.
Note
• You should specify "Yes" for only one of "LLDP", "VLAN" or
"IEEE802.1X".
• If "Yes" is specified for two or more of the parameters above,
the settings are prioritized as follows: "IEEE802.1X" >
"VLAN" > "LLDP". Therefore, if "Yes" is specified for both
"VLAN" and "LLDP", the VLAN-related settings are used.
Value Range
• Yes
• No
Default Value No
Configuration File Reference LLDP_ENABLE (Page 246)
LLDP-MED Interval Timer
Description Specifies the interval, in seconds, between sending each LLDP frame.
Value Range 5–3600
Default Value 30
Configuration File Reference LLDP_INTERVAL (Page 246)
4.3.4.3 CDP Settings
Enable CDP
Description Enables or disables CDP.
Value Range
• Yes
• No
Default Value No
Configuration File Reference CDP_ENABLE (Page 247)
CDP Interval timer
Description Specifies the time between CDP messages.
90 Administrator Guide Document Version 2014-05
4.3.4 Ethernet Port Settings