Filter
Top Products
G729A (Annexb)
Description Selects whether to enable the G.729A B Annex codec for voice data
transmission.
Value Range
• Yes
• No
Default Value No
Configuration File Reference CODEC_ANNEXB_G729A (Page 284)
PCMU (Enable)
Description Selects whether to enable the PCMU codec for voice data transmission.
Value Range
• Yes
• No
Default Value Yes
Configuration File Reference CODEC_ENABLE_PCMU (Page 283)
PCMU (Priority)
Description Specifies the numerical order usage priority for the PCMU codec.
Value Range 1–255
Default Value 1
Configuration File Reference CODEC_PRIORITY_PCMU (Page 284)
4.5.3.8 NAT Identity
RTP Keep Alive Interval
Description Specifies the interval, in seconds, between transmissions of the Keep
Alive packet to the unit in order to maintain the NAT binding information.
Note
• This setting is available only when [Transport Protocol] is set
to [UDP].
Value Range 0, 10–300 (0: Disable)
Default Value 0
Configuration File Reference SIP_RTP_KA_INTVL (Page 309)
126 Administrator Guide Document Version 2014-05
4.5.3 VoIP Settings [Line 1]–[Line n]