Panasonic KX-UTG200 Telephone User Manual


 
Value Range Max. 1024 characters
Note
The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
"<user>" must be less than 127 characters.
"<password>" must be less than 127 characters.
"<user>:<password>@" may be empty.
":<port>" can be omitted if you do not need to specify the
port number.
If "{mac}" is included in this URL, it will be replaced with the
unit’s MAC address in lower-case.
If "{MAC}" is included in this URL, it will be replaced with the
unit’s MAC address in upper-case.
If "{MODEL}" is included in this URL, it will be replaced with the
unit’s model name.
If "{fwver}" is included in this URL, it will be replaced with the
unit’s firmware version.
If this URL ends with "/" (slash), "{MODEL}.cfg" is automatically
added at the end of the URL.
For example, CFG_PRODUCT_FILE_PATH="http://host/
dir/" becomes CFG_PRODUCT_FILE_PATH="http://
host/dir/{MODEL}.cfg".
Default Value Empty string
Note
The URL specified by your phone system dealer may be preset
in the unit.
CFG_MASTER_FILE_PATH
Value Format String
Description Specifies the URL of the master configuration file, which is used when
all units need the same settings.
Note
When you change this setting, set "PROVISION_ENABLE" to
"Y" at the same time.
Document Version 2014-05 Administrator Guide 233
5.3.6 Provisioning Settings