Filter
Top Products
Value Range
• Y (Web port is always open)
• N (Web port is closed [can be opened temporarily through phone
user interface programming])
Notice
• If you want to set to "Y", please fully recognize the possibility of
unauthorized access to the unit through the Web user interface
and change this setting at your own risk. In addition, please take
full security measures for connecting to an external network and
control all passwords for logging in to the Web user interface.
Default Value
N
HTTP_VER
Value Format Integer
Description Specifies which version of the HTTP protocol to use for HTTP
communication.
Value Range
• 1 (Use HTTP 1.0)
• 0 (Use HTTP 1.1)
Note
• For this unit, it is strongly recommended that you specify "1" for
this setting. However, if the HTTP server does not function well
with HTTP 1.0, try changing the setting "0".
Default Value 1
Web User Interface Reference HTTP Version (Page 96)
HTTP_USER_AGENT
Value Format String
Description Specifies the text string to send as the user agent in the header of HTTP
requests.
Value Range Max. 64 characters
Note
• An empty string is not allowed.
• If "{mac}" is included in this parameter, it will be replaced with
the unit’s MAC address in lower-case.
• If "{MAC}" is included in this parameter, it will be replaced with
the unit’s MAC address in upper-case.
• If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
• If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Default Value Panasonic_{MODEL}/{fwver} ({mac})
Document Version 2014-05 Administrator Guide 249
5.4.5 HTTP Settings