Filter
Top Products
Default Value 60,500,440
Configuration File Reference BUSY_TONE_TIMING (Page 267)
4.6.6.3 Ringing Tone
Tone Frequencies
Description Specifies the dual-tone frequencies, in hertz, of ringback tones using 2
whole numbers separated by a comma.
Value Range 1–9 characters
0, 200–2000 (0: No tone)
Default Value 440,480
Configuration File Reference RINGBACK_TONE_FRQ (Page 267)
Tone Timings
Description Specifies the pattern, in milliseconds, of ringback tones using up to 10
whole numbers (off 1, on 1, off 2, on 2…) separated by commas.
Note
• It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
Value Range 1–60 characters
0–16000 (0: Infinite time)
Note
• Avoid setting 1–50 for any of the values.
Default Value 60,2000,3940
Configuration File Reference RINGBACK_TONE_TIMING (Page 268)
4.6.6.4 Stutter Tone
Tone Frequencies
Description Specifies the dual-tone frequencies, in hertz, of stutter dial tones to
notify that a voice mail is waiting, using 2 whole numbers separated by
a comma.
Value Range 1–9 characters
0, 200–2000 (0: No tone)
Default Value 350,440
Configuration File Reference DIAL_TONE4_FRQ (Page 268)
Document Version 2014-05 Administrator Guide 149
4.6.6 Tone Settings