Panasonic KX-UTG200 Telephone User Manual


 
Value Range 0, 200–2000 (0: No tone)
Default Value 440,480
Web User Interface Reference Tone Frequencies (Page 149)
RINGBACK_TONE_GAIN
Value Format Integer
Description Specifies the gain, in decibels, of the ringback tone.
Value Range (-80)–0
Default Value 0
RINGBACK_TONE_RPT
Value Format Boolean
Description Specifies whether the ringback tone is repeated.
Value Range
Y (Repeat)
N (No Repeat)
Default Value Y
RINGBACK_TONE_TIMING
Value Format Comma-separated Integer
Description Specifies the pattern, in milliseconds, of ringback tones using up to 10
whole numbers (off 1, on 1, off 2, on 2…) separated by commas.
Note
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
Value Range 0–16000 (0: Infinite time)
Note
Avoid setting 1–50 for any of the values.
Default Value 60,2000,3940
Web User Interface Reference Tone Timings (Page 149)
DIAL_TONE4_FRQ
Value Format Integer
268 Administrator Guide Document Version 2014-05
5.5.6 Tone Settings