Filter
Top Products
Station Features and Operation (PT/SLT)
72 User Manual
4.3.2 Account Code Entry
An Account Code is used to identify outside calls for accounting and billing purposes. The
account code is appended to the "Station Message Detail Recording (SMDR)" call record. For
incoming outside calls, account code are not required. For outgoing outside calls, you may be
required to enter an account code.
Your Account Code Entry mode is set to one of the following three modes by System
Programming.
In "Verified - All Calls" mode
• You must always enter a system-registered account code to make an outside call.
In "Verified - Toll Restriction Override" mode
• You can override the Toll Restriction imposed on your extension by entering a
system-registered account code before making an outside call (Toll Restriction
Override by Account Code Entry).
In "Option" mode
• You may enter any account code.
One mode is selected for each extension on a "Class of Service
*1
" basis.
Entering account codes before dialing
*1
Class of Service (COS) is used to define the features which are allowed for a group of extensions. For more details, please cousult
with your dealer.
One of the dial tones. Refer to the "Tone List" in the Appendix.
*
PT and SLT
account code
Enter an account code
(10 digits max., 0...9).
Confirmation tone
and dial tone
For PT: Press Account
(flexible button).
For SLT, PT: Dial 49.
Lift the handset or press
SP-PHONE/MONITOR.
Press CO or enter a line
access code
(9 or 81 through 88).
Dial the phone number.
phone no.
line access code
Dial tone 3*
For SLT, PT
For PT
4 9
If you dial a feature
number, you hear no tone.
Dial #.
You may dial 99
instead of "#".
(Account)
(CO)