Filter
Top Products
User Programming
56 User Manual
Programming
Conditions
• There is a maximum of 32 extension numbers. Each extension number can be two, three, or
four digits, consisting of 0 through 9. The and # keys cannot be used.
• An extension number is invalid if the first or second digits do not match with the program
[100] "Flexible Numbering, (01)-(16) 1st through 16th hundred extension blocks" setting.
If one digit is assigned as the leading digit, some extensions have two digits and some have
three digits. If two digits are assigned, some have three digits and some have four digits.
• A double entry or incompatible entry is invalid including the program [118] "Voice Mail
Extension Number Assignment", [124] "Phantom Extension Number Assignment" and
Display PT
Dial 003. Enter a jack number.
003
jack no.
<To end:>
Press NEXT.
<PT Display> <PT Display>
Jack NO?→
To enter jack number 01, you can
also press NEXT.
<PT Display Example>
Press END.
<To continue:> [When SELECT is pressed]
Repeat these steps
Enter the extension no.
extension no.
Press STORE.
Press NEXT or
PREV or SELECT.
Enter the desired
jack number.
jack no.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR
and enter the new name.
#01:EXT101
003 EXT NUMBER
NEXT
STORE
NEXT
PREV
SELECT
END