Filter
Top Products
Station Programming
36 User Manual
— To exit the Station Programming mode: Press [PAUSE] or lift the handset.
Initial Display Selection
Which display do you prefer
when a call is received?
8
Outside line name
Caller ID
2
18 1
1
Item Selection Programming Input
Ringing
Intercom Alert Assignment
Which way do you prefer to
receive an intercom call?
Directly – the party's voice is
heard without ringing.
No. Use the same tone.
(Call Waiting Tone 1)
Call Waiting Tone Type
Assignment
Yes. Use a different tone.
(Call Waiting Tone 2)
You can monitor the message
through the telephone speaker.
(Hands-free mode)
Live Call Screening Mode Set
Which voice mail service do
you prefer when a caller is
recording a message in your
mailbox?
Only an alert tone is heard.
(Private mode)
Pressing the One-Touch
Dialing button.
No line
Preferred Line Assignment
– Incoming
Which line do you prefer to
seize when you go off-hook
to receive calls?
A pre-assigned outside line
A ringing line
Full One-Touch Dialing
Assignment
Which way do you prefer to
dial the One-Touch Dialing
feature?
Going Off-hook and then pressing
the One-Touch Dialing button.
(01–12)
Outside line no.
12
3
2
3
2
32
1
1
1
1
2
2
2
4
4
5
5
7
7
2
Do you prefer to distinguish the
Call Waiting tone from an outside
line and an intercom call?