Filter
Top Products
Station Features and Operation (PT/SLT)
User Manual 173
Canceling
Checking and Selecting a message notification by the receiver
Calling back the message notification sender
Any Telephone
extension no.
Lift the handset or press
SP-PHONE/MONITOR.
Hang up or press
SP-PHONE/MONITOR.
Confirmation tone
and dial tone.
Dial 700.
7 0 0
phantom extension no.
Dial the extension number or the phantom extension
number where you left a message notification.
or
Display PT
Press MESSAGE button, Another Extension Message Waiting button or the
Phantom Extension Message Waiting button repeatedly until the desired message appears.
If there is any message notification, the message waiting lamp, another extension
message waiting lamp or phantom extension message waiting lamp (MESSAGE indicator)
light will be on. When the telephone is idle and on-hook;
• The message notifications you received are shown on the display in the order
they were received.
<PT Display Example>
When Tony at extension 123 left a message notification:
123:Tony
or
or
MESSAGE MESSAGE
(Another Extension
Message Waiting)
(Phantom Extension
Message Waiting)
MESSAGE
PT
• If there are more than one message
notification left on your extension, you
can choose the desired message sender
(display PT only).
• The message notification is
cleared after the conversation.
Press MESSAGE button, Another Extension
Message Waiting button or the Phantom Extension
Message Waiting button.
Lift the handset or press
SP-PHONE/MONITOR.
Talk.
Dial tone 4*, when
a message has been
received at your
extension.
* One of the dial tones. Refer to the "Tone List" in the Appendix (Section 6).
or
or
MESSAGE
(Another Extension
Message Waiting)
(Phantom Extension
Message Waiting)
MESSAGEMESSAGE