Filter
Top Products
Appendix
User Manual 267
Conditions
• If the displayed characters exceed sixteen digits, "&" is shown at the right-hand edge.
• The duration time display is only shown when you make or receive an outside call. Count
start time for outgoing calls can be programmed as desired.
• When you confirm key programming, be sure to press a button while on-hook. If the "Full
One-Touch Dialing" feature is set, dialing mode will start when pressing PF (Programmable
Feature), DSS (Direct Station Selection), SAVE or REDIAL button.
Hands-free:On Enable "Full One-Touch Dialing" mode.
Jack04 <=> EXT104 Confirm jack number and extension number.
Loop-CO Loop-CO (L-CO) button is assigned.
Message Waiting Message Waiting (MESSAGE) button is assigned.
MW-123 The Another Extension Message Waiting button is
assigned.
NIGHT Night/Day button is assigned.
Not Stored No programming is assigned.
Pref.In :CO-02 Select "Prime Line (Outside Line) Preference —
Incoming".
Pref.In :NO Select "No Line Preference — Incoming".
Pref.In :Ring Select "Ring Line Preference — Incoming".
Pref.Out:CO-02 Select "Prime Line (Outside Line) Preference —
Outgoing".
Pref.Out:ICM Select "Prime Line (INTERCOM) Preference —
Outgoing".
Pref.Out:Idle Select "Idle Line Preference — Outgoing".
Pref.Out:No Select "No Line Preference — Outgoing".
Save SAVE button is assigned.
Tone Call Select Ring-Calling mode.
TRK GRP-3 Group-CO (G-CO) button is assigned.
VTR-101 Voice Mail (VM) Transfer button is assigned.
Voice Call Select Voice-Calling mode.
092-555-2111 One-Touch Dialing button is assigned.
Display Description