Filter
Top Products
Station Features and Operation (PT/SLT)
116 User Manual
<PT>
• The destination extension shows the Caller ID and the extension number where the call
was transferred from on the display.
<Example> The Caller ID number "123456789" is transferred from extension 101.
The priority of the display is:
Caller ID name > Caller ID number > Outside line name > Blank (if none of these is
assigned).
• A flexible CO button can be assigned as a DSS button.
• To use "One-Touch Transfer", System Programming is required.
• Pressing the FLASH button while dialing clears the display. Then you can enter the
revised number.
• If you want to return to the held call, press the TRANSFER button or corresponding CO,
INTERCOM button before the destination extension answers.
• When "Transfer Recall" occurs, the display shows:
<Example>
<SLT>
• If you want to return to the held call, flash the hookswitch before the destination
extension answers.
Programming Guide References
[108] Automatic Hold by CO / DSS Button
[201] Transfer Recall Time
[990] System Additional Information
User Manual References
4.3.22 Call Park
101 123456789
RCL: Ext 103