Filter
Top Products
User Programming
44 User Manual
3.1 User Programming Instructions
3.1.1 General Programming Instructions
User Programming allows you, any extension user who knows the User Programming
Password, to program the following system features from your telephone individually.
• [000] Date and Time Set
• [001] System Speed Dialing Number Set
• [003] Extension Number Set
• [004] Extension Name Set
• [005] Flexible CO Button Assignment
• [006] Operator / Manager Extension Assignment
• [007] DSS Console Port and Paired Telephone Assignment
• [008] Absent Messages
• [009] Quick Dial Number Set
• [014] VM Name Set
• [017] DISA User Codes
To program, you need to switch your telephone to the User Programming mode.
During the programming mode, your telephone is in a busy condition for outside callers.
If you want to make a normal call operation, you must finish the programming mode.
Default Setting
This system has default factory settings. Any required changes can be written in the
"Programming Tables".
Required Telephone Set
One of the following Proprietary Telephone (PT) sets with display is required for User
Programming:
• Proprietary Telephone (PTs): KX-T7135, KX-T7130, KX-T7030.
Using the Overlay
A programming overlay is packed with the telephone at the factory. This overlay should be
used at all times in the programming mode since the functions of the telephone keys change
during programming.
During Normal Operation During Programming
(PAUSE) PAUSE
(SP-PHONE) NEXT
(REDIAL) PREV (PREVIOUS)