Filter
Top Products
Station Features and Operation (PT/SLT)
User Manual 153
4.3.46 External Feature Access
Allows you to access special features (e.g., Call Waiting) offered by a host PBX, Centrex or
Central Office. This feature is effective only during an outside call.
You can access the feature by using either the FLASH button or the feature number.
Using the FLASH button
Using the feature number
Conditions
• Flash Time
The flash time must be assigned as required by the Centrex, host PBX or outside line.
<PT>
• Memory Dialing
During outside calls, a FLASH stored in System Speed Dialing or One-Touch Dialing
works as External Feature Access, not as Flash (Disconnect Signal).
<SLT>
• This feature does not function, if an SLT has a call on Consultation Hold.
Programming Guide References
[413] Flash Time
PT
Press FLASH.
Enter the desired
service code.
code
During a conversation with an outside party;
• The current call is placed on hold.
FLASH
PT and SLT
For SLT
For PT: Press TRANSFER.
For SLT: Flash the hookswitch.
Enter
the desired
service code.
For PT
code
During a conversation with an outside party;
Dial 6.
6
• The current call is placed on hold.
Dial tone
TRANSFER