Filter
Top Products
User Programming
User Manual 59
Programming
Conditions
• There is a maximum of 32 names. Each name has a maximum of 10 characters.
• For entering characters, see "Entering Characters" in 3.1.2 Programming Methods.
• Program [003] Extension Number Set is used to assign extension numbers.
User Manual References
4.3.51 Intercom Calling
Display PT
Dial 004. Enter a jack number.
004
jack no.
<To end:>
Press NEXT.
<PT Display> <PT Display>
Jack NO?→
Press END.
<To continue:> [When SELECT is pressed]
Repeat these steps
Enter a name.
name
Press STORE.
Press NEXT or
PREV or SELECT.
Enter the desired
extension number.
extension no.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR
and enter the new name.
004 EXT NAME SET
To enter jack number 01, you can
also press NEXT.
<PT Display Example>
#01:Not Stored
NEXT
STORE
NEXT
PREV
SELECT
END