Filter
Top Products
Station Features and Operation (PT/SLT)
User Manual 235
4.4.5 Call Log Lock, Incoming in the Common Area
The operator or manager can lock the displays of extensions so that the "Call Log, Incoming"
feature is not shown on the displays when the Caller ID Indication — Common button is
pressed. It prevents others from seeing the information stored in the common area.
Locking
Unlocking
Conditions
• Call Log Lock Control, Incoming in the Common Area — CANCEL
If the Manager or an Operator forgets the lock code, refer to 4.4.4 Call Log Lock Control,
Incoming in the Personal Area — CANCEL.
Programming Guide References
[100] Flexible Numbering
[406] Caller ID Assignment
PT
Lift the handset or press
SP-PHONE.
Hang up or press
SP-PHONE.
Enter the 3-digit lock code
(000 through 999) twice.
lock code lock code
same code
Confirmation tone
and dial tone
Dial 57.
5 7
<PT Display Example>
Log Locked :XXX
Lock code you dialed
PT
Lift the handset or press
SP-PHONE.
Hang up or press
SP-PHONE.
Enter the same lock code
you used to lock the extension.
lock code
Confirmation tone
and dial tone
Dial 57.
5 7
<PT Display Example>
Unlocked