Filter
Top Products
Station Features and Operation (PT/SLT)
User Manual 147
4.3.42 Emergency Call
Allows you to dial out a pre-assigned emergency number after seizing an outside line
regardless of the restrictions imposed on your extension. Up to 10 emergency dial numbers can
be stored in the system.
Dialing
Conditions
• The emergency number "911" is already stored at the factory. System Programming is
required to store other emergency numbers.
• An emergency call is allowed even in the following cases;
— in Account Code – Verified (All Calls, Toll Restriction Override) mode
— in any toll restriction level
— in Electronic Station Lockout / Remote Station Lock
• If your telephone is connected to a host PBX, you must dial the host PBX line access code
after dialing the line access code and it must be included as the first digit of the emergency
no.
Programming Guide References
[334] Emergency Dial Number Set
Any Telephone
Lift the handset or press
SP-PHONE/MONITOR.
Dial the line access code
(9 or 81 through 88).
line access code emergency no.
Dial the emergency number.
Dial tone
• You may press a CO button instead.