Filter
Top Products
User Programming
User Manual 61
Programming
Conditions
• This setting is required if Trunk (Outside line) Security mode is selected in program [809]
DISA Security Type.
• Each code should be unique and composed of four through ten numerical digits, 0 through
9.
User Manual References
4.3.37 Direct Inward System Access (DISA)
Display PT
Dial 017. Enter a DISA user code number (01-32).
017
DISA user code no.
<To end:>
Press NEXT.
<PT Display> <PT Display>
User Code NO?→
Press END.
<To continue:> [When SELECT is pressed]
Repeat these steps
Enter a DISA user
code (Blank or 4-10
digits).
DISA user code
Press STORE.
Press NEXT or
PREV or SELECT.
Enter the desired
DISA user code number.
DISA user code no.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR
and enter the new name.
017 USER CODES
To enter user code number 01,
you can also press NEXT.
<PT Display Example>
01: C:8
Press →.
Enter COS
number (1-8).
COS no.
NEXT
STORE
NEXT
PREV
SELECT
END