Filter
Top Products
User Programming
46 User Manual
• The display shows the Initial Message: USR-PGM NO?
Note
• If nothing is entered within five seconds after the PAUSE button is pressed,
programming mode is canceled.
• During the programming mode, your extension is treated as a busy extension.
• Only one proprietary telephone can be in programming mode at any one time.
• The User Programming Password is not shown on the display for security reason. The
password can be changed by System Programming.
Programming Guide References
[120] User Password
In this section, programs [001] through [004] and [017] are explained. Please consult with your
dealer when you need to change the following programs:
• [005] Flexible CO Button Assignment
• [006] Operator / Manager Extension Assignment
• [007] DSS Console Port and Paired Telephone Assignment
• [008] Absent Messages
• [009] Quick Dial Number Set
• [014] VM Name Set