Filter
Top Products
Station Programming
32 User Manual
Confirming the assigned data on the Flexible button
— Be sure that you are in the Station Programming mode: Press [PAUSE] [9] [9].
— To exit Station Programming mode: Press [PAUSE] or lift the handset.
— If you wish to change the data, follow the programming procedure explained in this section.
Clearing the data on the Flexible button
— Be sure that you are in the Station Programming mode: Press [PAUSE] [9] [9].
— To exit Station Programming mode: Press [PAUSE] or lift the handset.
— The lists on the following pages are the buttons and programming access numbers used for
Station Programming. Detailed operating instructions are explained on each page in this
section.
The display shows the initial programming mode.The display shows the current status.
PT
Press HOLD (END).
Press the desired Flexible
(CO, DSS, PF) button.
HOLD
PT
Press the desired Flexible
(CO, DSS, PF) button
that you wish to clear.
Dial 2.
Press STORE.
2
The STORE indicator lights.
The display shows the initial programming mode.
AUTO DIAL
STORE