Filter
Top Products
Station Features and Operation (PT/SLT)
User Manual 115
Call Transfer using a DSS button
Allows PT users to perform Screened or Unscreened Call Transfer by using a DSS button.
There are two operations, depending on whether or not One-Touch Transfer
*1
is set.
When "One-Touch Transfer" mode is enabled:
When "One-Touch Transfer" mode is disabled:
Conditions
• Automatic Disconnection
If there is no answer for 30 minutes after "Transfer Recall" starts, the line will be
disconnected.
• If the destination extension does not answer the call within twelve rings (default), "Transfer
Recall" occurs. If the transferred call is an outside call, it is possible to select whether
Transfer Recall will go to the initiating extension or to Operator 1 by System Programming.
*1
One-Touch Transfer allows you to hold an outside call and transfer it to an extension by pressing one key. This feature provides
automatic hold and transfer, without pressing the TRANSFER button. System Programming is required to use this function.
PT
Press DSS (flexible button).
During a conversation;
The other party is placed on hold and the destination extension
is called immediately.
(DSS)
PT
Press DSS (flexible button).
During a conversation;
Press TRANSFER.
TRANSFER
(DSS)