Filter
Top Products
Introduction
6 User Manual
Conference, Unattended allows you to leave the conference and let the other two parties
continue conversation when you are in a conference with two outside parties. You can also
return to the conference.
Data Line Security prohibits various tones, such as a call waiting tone or hold recall tone, from
sounding at the extension in the data communication mode. It also blocks overriding by other
extensions, such as Executive Busy Override.
Doorphone and Door Opener (— Option) enables the conversation between you and a
visitor at the door. You can also unlock the door a few seconds from your phone.
Executive Busy Override allows you to enter into an existing conversation at an extension/
outside line.
Full One-Touch Dialing allows you to have easy access to a desired party or system feature
by pressing just one button.
Message Waiting allows you to leave a message notification for another extension. The
message waiting lamp (MESSAGE indicator) gives a visual indication that a message
notification has been received. Even if the Message button is not provided or assigned, a special
tone after going off-hook indicates that a message notification has been received.
Paralleled Telephone Connection allows you to connect your PT in parallel with an SLT.
Each telephone can have the same extension number so that you can use either telephone.
VPS Integration (— Option) enables forwarding any incoming call to Voice Mail. Recording
or Playing back the message(s) is also available. To use Voice Mail services, installing a Voice
Processing System (VPS) is required.
Terms used in the Descriptions
Feature Numbers
A feature number is an access code for various functions when programming or executing
features using proprietary or single line telephones connected to the system. You can access
available features by dialing the corresponding feature number (and additional number, if
required).
There are two types of feature numbers as follows:
• Flexible feature number
• Fixed feature number
While fixed feature numbers cannot be changed, flexible feature numbers can be changed.
Refer to the Features Guide for details. In this manual, the default numbers are used to describe
each operation and illustration. Use the new programmed number if you have changed a
flexible feature number. The lists of fixed numbers and default flexible feature numbers are
shown in the Appendix .
If you use a dial pulse (DP) type single line telephone (SLT);
It is not possible to access features that have " " or "#" in their feature numbers.
Tones
Various tone types, such as a Confirmation tone, Dial tone, Call Waiting tone, etc. are explained
in the Appendix.
Display
The display examples are in each operation step, if required. The display information list is in
the Appendix for your convenience.