Filter
Top Products
Setting Communication Preferences
225
3. Enter your User Name and Password for your ISP or network service. See
“Entering a user name” and “Entering a password” earlier in this chapter for
details.
4. Tap the Connection pick list and select a connection to a Bluetooth-enabled
GSM phone, a high-speed wireless data network, or a LAN access points for
which you have already created a trusted pair. The Connection name is based
on the model of your phone (if you used Phone Link to create the connection)
or the name you assigned to the high-speed wireless data network or LAN
access point connection when you created it.
5. If you selected a Bluetooth phone connection in step 4, tap Phone and enter the
dial-up connection number for your ISP, and then tap OK. See “Adding
telephone settings” earlier in this chapter for details.
If you are using a Bluetooth Phone or LAN access point, you can now connect and
disconnect as described earlier in this chapter. If you are using a high-speed
wireless data network connection, you must send an initialization (INIT) string as
described in the following procedure.
To enter an INIT string for a high-speed wireless data network connection:
1. After completing step 5 in the preceding procedure, tap Details.
Enter the user name and password
you use to connect with your ISP