Filter
Top Products
Chapter 4: Using the web interface
68 Using the Dashboard
Start/stop a Streaming session on the LAN interface
To start or stop a Streaming session, click the link with the name of your
Streaming profile under STREAMING PROFILES ON LAN.
Note that if another primary profile is active you must stop it before you can
start your new profile!
If a primary profile is already active, your new profile will not appear as a link
but as plain text. The active primary profile is displayed as a link with the text
“Stop <name of profile>”. Click this link first to stop the active profile. Then
click your new profile, which is now displayed as a link.
For information on setup of the network user groups, see Managing LAN
network users on page 111. For information on how to set up a profile, see
Using profiles on page 139.
Note
Before starting a Streaming session, make sure you have set up a
Streaming profile for your user group in the SETTINGS > LAN >
Network user groups page.
Important
If you have selected a Streaming connection as your primary
profile, the LAN interface will be running a Streaming
connection until you stop it or disconnect the interface.
However, if you select one or more secondary profiles, you can
set up your traffic flow filter so that it will only use the
Streaming profile for certain types of traffic.
Note
You may have difficulties establishing the fastest Streaming
connection if you are located close to the edges of the satellite beam.
256 kbps Streaming on TracPhone FB500 and 128 kbps Streaming on
TracPhone FB250 normally require an elevation angle of more than
15 degrees.
BGAN-X_UM.book Page 68 Wednesday, April 30, 2008 12:48 PM