Filter
Top Products
Chapter 3: Operating the system
Using a phone or fax machine 51
33333
Operating the system
Sending a fax message to the terminal
To send a fax message to the terminal, dial
+ <Mobile number> #
• + is the prefix used in front of the country code for international calls.
• Mobile number. The first part of the mobile number is always 870, which is
the “country code” for the BGAN system. Use the 3.1 kHz mobile number if
you are calling a G3 fax and the UDI number if you are calling an ISDN G4
fax connected to the terminal. If the mobile numbers are listed in the web
interface, you can look them up as follows:
Connect a computer, access the web interface and select PHONE BOOK >
Mobile numbers. For further information, see Viewing and editing the
mobile numbers on page 75.
If the mobile numbers are not available in the web interface, refer to your
airtime subscription.
Receiving a fax message
An analog fax machine connected to the terminal can only receive a fax with
3.1 kHz Audio. Refer to Selecting the incoming call type on page 41.
An ISDN G4 fax machine connected to the TracPhone FB500 terminal can only
receive a fax with UDI. TracPhone FB250 does not support UDI and cannot be
used with a G4 fax machine.
Note
There are four mobile numbers, one for 3.1 kHz Audio, one for
Standard Voice, one for UDI and one for RDI.
BGAN-X_UM.book Page 51 Wednesday, April 30, 2008 12:48 PM