Filter
Top Products
Chapter 5: Troubleshooting
Status signaling 177
55555
Troubleshooting
08031 Failed to
enter normal
operation
Antenna failed to
start up normally.
Reboot the
terminal.
Contact your
distributor if the
problem persists.
08032 Firmware image
version lower
than active
antenna
version
The firmware in the
antenna is newer
than expected by
the terminal.
Update the terminal
software.
08033 Firmware image
doesn't
support
antenna
hardware
The antenna
hardware version is
not supported by
the terminal.
Contact your
distributor.
08034 Antenna failed
to exit Flash
Manager. Power
cycle needed
New firmware was
successfully
uploaded to the
antenna but the
antenna failed to
start normally with
the new firmware.
Reboot the
terminal. Contact
your distributor if
the problem
persists.
08035 Unable to open
port for HPA
burst
monitoring
There was an error
communicating with
the antenna.
Reboot the
terminal. Contact
your distributor if
the problem
persists.
ID Event Text Explanation Remedy
BGAN-X_UM.book Page 177 Wednesday, April 30, 2008 12:48 PM