Filter
Top Products
Chapter 4: Using the web interface
Administration 145
44444
Using the web interface
3. Type in an Evaluation Precedence Index in the Eval.Prec. Index column.
4. Select the Profile from the scroll list.
The available profiles are the profiles listed in the ADMINISTRATION >
Profiles page.
5. Fill in one or more of the following fields to define the filter.
The allowed ranges appear in hover text when you pass the mouse over
the fields.
• Source address + Subnet mask.
• Protocol number.
• Destination port range (From and To). Note that Source and
Destination are relative the core network. This means that Destination
is your terminal.
• Source port range (From and To).
• Type of Service + Type of Service mask.
For further information on the principles and parameters of the traffic flow
filters, refer to the 3GPP standards TS27.007 V4.2.0 and TS 23.060 V4.7.0.
6. Click Apply at the bottom of the page.
Note
This field is mandatory. Each filter must have a different
Evaluation Precedence Index.
BGAN-X_UM.book Page 145 Wednesday, April 30, 2008 12:48 PM