Filter
Top Products
Chapter 4: Using the web interface
94 Setting up the interfaces
•If you select 3.1 kHz Audio, all outgoing calls, except UDI/RDI, will use
the call type 3.1 kHz Audio. If you make a Standard call it will be
converted to a 3.1 kHz Audio call. Outgoing UDI or RDI sessions will be
not be influenced by this setting.
5. Click Apply.
Note
You can override the call type setting for outgoing calls by
dialing one of the following prefixes before the number:
• 1* (force the call to Standard)
• 2* (force the call to 3.1 kHz Audio)
Refer to Overriding the default outgoing call type on page 40.
BGAN-X_UM.book Page 94 Wednesday, April 30, 2008 12:48 PM