Filter
Top Products
Chapter 4: Using the web interface
136 Administration
Saving a configuration to a file
If you need to reuse a configuration in another terminal of the same type, you
can save your current configuration to a file, which can then be loaded into
the other terminal.
Do as follows:
1. In the ADMINISTRATION page, under Configuration, click Save.
2. Accept the default destination file name or type in the destination file
name and location.
3. Click OK.
The configuration is now saved to a file. This file is used to load the
configuration into another terminal. See the next section.
Loading a configuration from a file
1. In the ADMINISTRATION page, under Configuration, click Load.
2. Click Browse... to browse to the file you want to import. Then click Open.
3. Click Load.
The new configuration is now loaded into your terminal.
Logging off administration
If you have not entered anything for 30 minutes under ADMINISTRATION, you
are logged off automatically.
To log off manually, click Logoff under Administrator logoff in the
ADMINISTRATION page.
BGAN-X_UM.book Page 136 Wednesday, April 30, 2008 12:48 PM