Filter
Top Products
Chapter 4: Using the web interface
Selecting the preferred BGAN satellite 131
44444
Using the web interface
Selecting the preferred BGAN satellite
Overview
By default the terminal is set up to automatically find the most appropriate
satellite to connect to (“Auto” mode). However, if you are located in an area
with more than one BGAN satellite available, you can select the satellite you
prefer to use when registering on the BGAN network.
To select the preferred BGAN satellite
Do as follows:
1. Select SETTINGS > Satellite selection from the left navigation pane.
BGAN-X_UM.book Page 131 Wednesday, April 30, 2008 12:48 PM