Filter
Top Products
Chapter 3: Operating the system
Using a phone or fax machine 43
33333
Operating the system
If there was an error establishing the connection, refer to the Troubleshooting
Guide on page 157.
If you are using the IP handset, the handset may show an error message.
Depending on the type of error, the web interface may also show an error
message. See Viewing the Event list or the Event log on page 150.
Receiving a call
To be able to receive a call, the phone must be connected to the relevant
interface on the terminal.
By default, all devices connected to the Phone/Fax interface, the ISDN
interface or the LAN (PoE) interface will ring when one of the mobile numbers
is called. Note, however, that this depends on the call type settings. Refer to
Selecting the incoming call type on page 41.
Call log
Information of missed calls is stored in the call log of the terminal. You can
view the call log in the web interface under CALLS. For further information,
see Viewing the lists of calls on page 77.
BGAN-X_UM.book Page 43 Wednesday, April 30, 2008 12:48 PM