Filter
Top Products
Chapter 4: Using the web interface
90 Setting up the interfaces
5. Type in the Destination port range.
6. Repeat step 3 to step 5 to set up port forwarding to additional servers.
7. In the Active column, select which ports should have port forwarding
activated.
8. Click Apply.
You can now access the mail server from the Internet, using the external IP
address of the terminal.
Configuring the Phone/Fax interface
Do as follows:
1. Select SETTINGS > Phone/Fax from the left navigation pane.
BGAN-X_UM.book Page 90 Wednesday, April 30, 2008 12:48 PM