Filter
Top Products
Chapter 4: Using the web interface
132 Selecting the preferred BGAN satellite
2. Select the satellite you prefer to use.
If you select Auto (the default setting) the TracPhone system
automatically uses the most appropriate satellite.
Note that at this writing the POR satellite is not yet available.
3. Click Apply.
The TracPhone terminates all ongoing connections and deregisters from
the current satellite before registering on the new satellite.
Important
If you have any ongoing calls or data sessions, they will be
terminated when you click Apply!
Note
If you have selected a satellite, your TracPhone system will only try to
establish a connection to the selected satellite. This means that if the
antenna is outside the coverage area for that satellite, the TracPhone
system will not be able to register with the BGAN network.
BGAN-X_UM.book Page 132 Wednesday, April 30, 2008 12:48 PM