Filter
Top Products
Chapter 4: Using the web interface
Setting up the interfaces 103
44444
Using the web interface
4. To allow outgoing access for the activated user group(s), select Outgoing
Access under SETTINGS FOR ACTIVE CLOSED USER GROUP. Note that if you
selected Subscribed above, this setting will not be used.
5. Select Preferential if you want the activated user group to be selected
when a member of a user group does not specify the group number during
call set up. Note that if you selected Subscribed above, this setting will not
be used.
6. Click Apply.
BGAN-X_UM.book Page 103 Wednesday, April 30, 2008 12:48 PM