Filter
Top Products
Chapter 3: Operating the system
40 Using a phone or fax machine
For further information, see Configuring the Phone/Fax interface on
page 90.
• IP handset. Select the call type for each handset in the web interface under
SETTINGS > IP Handset > Call settings. For further information, see Setting
the call types for IP handsets on page 108.
Overriding the default outgoing call type
To override the default setting for a specific outgoing call, do as follows:
•To use Standard Voice for the call,
dial 1* before the number.
•To use 3.1 kHz Audio for the call,
dial 2* before the number.
Example: To make a call to the number +45 39558800, forcing the
connection to use Standard Voice, dial 1* 0045 39558800 followed
by # if calling from an analog or ISDN phone, or off-hook key if
calling from an IP handset.
Note
This will not change the default call type, only the type used for the
ongoing call.
BGAN-X_UM.book Page 40 Wednesday, April 30, 2008 12:48 PM