Aastra Telecom 9143i Series IP Phone User Manual


  Open as PDF
of 1184
 
Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
41-001160-03, Rev 00, Release 2.4 A-211
Parameter
topsoftkeyN value
Top Softkeys->Value
(In WEb UI)
Aastra Web UI Operation->Softkeys and XML
Configuration Files aastra.cfg, <mac>.cfg
Description This is the value you assign to the softkey.
The “topsoftkeyN value” parameter can be set for the following softkey
types only:
speeddial (you can enter a speeddial number for this field;
optionally, you can also enter a prefix for the
speeddial value to allow the phone to dial the prefix
after you press the speeddial programmable key;
you then enter the rest of the number from the
keypad on the phone.)
•blf
sprecode
•park
pickup
•dcp
•xml
•blf/xfer
speeddial/xfer
speeddial/conf
paging
Notes:
1. For speeddial - Value is the phone number, extension, or prefix
number to enter for the softkey.
2. For blf - Value is the extension you want to monitor.
3. For sprecode - Value is dependent on services offered by server.
4. For Park, Pickup - For valid values, see Chapter 5, the section,
“Park/Pickup Call Server Configuration Values” on page -238. For
Park/Pickup examples, see Chapter 5, the section, “Model 6757i/
6757i CT and 9480i/9480i CT Examples” on page -236.
5. For xml - You can specify a URI to use for this XML softkey. The
variables you can use with the XML softkey URI are:
$$SIPUSERNAME$$
$$SIPAUTHNAME$$
$$PROXYURL$$
$$LINESTATE$$
$$LOCALIP$$
$$REMOTENUMBER$$
$$DISPLAYNAME$$
$$SIPUSERNAME$$
$$INCOMINGNAME$$
$$CALLDURATION$$
$$CALLDIRECTION$$
Draft 1