Filter
Top Products
Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
41-001160-03, Rev 00, Release 2.4 A-197
Parameter –
softkeyN value
Value
(In Web UI)
Aastra Web UI Operation->Softkeys and XML
Configuration Files aastra.cfg, <mac>.cfg
Description This is the value you assign to the softkey.
The “softkeyN value” parameter can be set for the following softkey types
only:
• speeddial (you can enter a speeddial number for this field;
optionally, you can also enter a prefix for the
speeddial value to allow the phone to dial the prefix
after you press the speeddial softkey; you then
enter the rest of the number from the keypad on the
phone.)
•blf
• sprecode
•park
• pickup
•dcp
•xml
•blf/xfer
• speeddial/xfer
• speeddial/conf
• paging
Notes:
1. For speeddial - Value is the phone number, extension, or prefix
number to enter for the softkey.
2. For blf - Value is the extension you want to monitor.
3. For sprecode - Value is dependent on services offered by server.
4. For Park, Pickup - For valid values, see Chapter 5, the section,
“Park/Pickup Call Server Configuration Values” on page -238. For
Park/Pickup examples, see Chapter 5, the section, “Model 6757i/
6757i CT and 9480i/9480i CT Examples” on page -236.
5. For xml - You can specify a URI to use for this XML softkey. The
variables you can use with the XML softkey URI are:
• $$SIPUSERNAME$$
• $$SIPAUTHNAME$$
• $$PROXYURL$$
• $$LINESTATE$$
• $$LOCALIP$$
• $$REMOTENUMBER$$
• $$DISPLAYNAME$$
• $$SIPUSERNAME$$
• $$INCOMINGNAME$$
• $$CALLDURATION$$
• $$CALLDIRECTION$$
Draft 1