Filter
Top Products
Operational, Basic, and Advanced Parameters
A-8 41-001160-03, Rev 00, Release 2.4
IP Phone Administrator Guide
Network Settings
Parameter –
dhcp
DHCP
(in Web UI)
IP phone UI Options->Administrator Menu->
Network Settings
Aastra Web UI Advanced Settings->Network->
Basic Network Settings
Configuration Files aastra.cfg, <mac>.cfg
Description Enables or disables DHCP. Enabling DHCP populates the required
network information. The DHCP server serves the network information
that the IP phone requires. If the IP phone is unable to get any required
information, then you must enter it manually. DHCP populates the
following network information:
IP Address, Subnet Mask, Gateway,, Domain Name Servers (DNS),
TFTP, HTTP, HTTP Port, HTTPS, HTTPS Port, and FTP servers, and
Timer Servers.
Note: For DHCP to automatically populate the IP address or qualified
domain name for the TFTP server, your DHCP server must support
Option 66.
Format Integer
Default Value 1 (enabled)
Range 0 (disabled)
1 (enabled)
Example dhcp: 1
Parameter –
ip
Ip Address
(in Web UI)
IP phone UI Options->Administrator Menu->
Network Settings
Aastra Web UI Advanced Settings->Network->
Basic Network Settings
Configuration Files aastra.cfg, <mac>.cfg
Description This parameter assigns a static IP address to the IP phone device.
Note: For DHCP to automatically populate this parameter, your DHCP
server must support Option 66.
Format IP address
Default Value 0.0.0.0
Range Not Applicable
Example ip: 192.168.0.25
Draft 1