Filter
Top Products
Operational Features
41-001160-03, Rev 00, Releaes 2.4 5-265
Configuring Operational Features
3 Select a state using the UP and DOWN arrow keys.
You can enable/disable a specific account on the phone with any or all of the following states.
However, the configuration you set will apply to all accounts on the phone.
• All - Enables CFWD All on the phone and forwards all incoming calls to the specified number.
• Busy - Enables CFWD Busy on the phone and forwards incoming calls to a specified number if
DND has been enabled OR if the phone is currently engaged in another call.
• No Answer - Enables CFWD NoAns on the phone and forwards incoming calls to a specified
number if the call has not been answered for the specified number of rings.
Note: If CFWD All AND CFWD Busy AND CFWD NoAns are all enabled (and/or if the account has
DND enabled), the CFWD All settings take precedence over CFWD Busy and CFWD NoAns.
You can also use the following keys if required:
All Off - Disables all CFWD states for the phone.
All On - Enables all CFWD states for the phone.
Note: In “Phone” mode, the initial configuration you set for an account applies to all the
accounts on the phone.
4 Press the CHANGE key for the mode you selected in step 2. Scroll to the CFWD State screen. This
displays the current state of the mode you selected. In the following example, the CFWD All state is
ON.
Aastra IP Phone UI
Step Action
CFWD State
Screen
1. Cfwd All
1. Cfwd State
Done
On
Change
Cfwd State
Next
On
Set
Cfwd State
Next
Off
Set
Use to view
Change
Draft 1