Filter
Top Products
Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
A-192 41-001160-03, Rev 00, Release 2.4
IP Phone Administrator Guide
Softkey/Programmable Key/Feature Key/
Expansion Module Key Parameters
This section provides the softkey, programmable key, feature key, and expansion
module key parameters you can configure on the IP phones. The following table
provides the number of keys you can configure for each model phone and
expansion module, and the number of lines available for each type of phone.
*The M670i expansion module consists of 36 softkeys. You can have up to 3 expansion modules on an IP
phone totaling 108 softkeys. Valid for 6753i, 6755i, 6757i, and 6757i CT phones.
**The M675i expansion module consists of 60 softkeys. You can have up to 3 expansion modules on an IP
phone totaling 180 softkeys. Valid for 6755i, 6757i, and 6757i CT phones.
***On the 6753i, two of the 6 programmable keys are the DELETE and SAVE keys and can be programmed
only if Administrator allows.
IP Phone
Model
Softkeys
Expansion Module
Keys
Programmable
Keys
Lines
Available
Handset
Keys
Available
9143i - Not Applicable 7 9-
9480i 6 Not Applicable - 9-
9480i CT 6 Not Applicable - 915
6753i - 36 to 108*
(Model M670i)
6*** 9-
6755i 6 Bottom Keys 36 to 108*
(Model M670i)
60 to 180**
(Model M675i)
6 Top Keys 9-
6757i 12 Top and
Bottom Softkeys
36 to 108*
(Model M670i)
60 to 180**
(Model M675i)
- 9-
6757i CT 12 Top and
Bottom Softkeys
36 to 108* on Base
Station
60 to 180** on Base
Station
(Model M675i)
- 915
Note: When entering definitions for softkeys, the “#” sign must be
enclosed in quotes.
Draft 1