Filter
Top Products
Network Settings
4-6 41-001160-03, Rev 00, Releaes 2.4
IP Phone Administrator Guide
Enabling/Disabling DHCP Using the IP Phone UI
Use the following procedure to enable/disable DHCP on the phone using the IP
Phone UI.
IP Phone UI
Step Action
1 Press on the phone to enter the Options List.
2Select Administrator Menu.
3 Enter your Administrator password.
Note: The IP Phones accept numeric passwords only.
4Select Network Settings.
5 Select option DHCP.
6 Press Change to set "Use DHCP?" to "Yes" (enable) or "No" (disable).
7 Press Done to save the changes.
Draft 1