Filter
Top Products
Administrator Level Options
41-001160-03, Rev 00, Releaes 2.4 3-89
Administrator Options
802.1x Support
The IP phones support the IEEE 802.1x Protocol. The 802.1x Protocol is a
standard for passing Extensible Authentication Protocol (EAP) over a wired or
wireless Local Area Network (LAN).
The 802.1x Protocol on the IP phone facilitates media-level access control, and
offers the capability to permit or deny network connectivity, control LAN access,
and apply traffic policy, based on user or endpoint identity. This feature supports
both the EAP-MD5 and EAP-TLS Protocols.
An Administrator can configure the following parameters for the 802.1x Protocol.
Note: If configuring 802.1x using the IP Phone UI, the certificates
and private keys must already be configured and stored on the phone.
Use the configuration files or the Aastra Web UI to load certificates
and private keys.
Parameter
In
IP Phone UI
Parameter in
Aastra Web UI
Parameters in
Configuration Files
Description
EAP-MD5
802.1x
Mode
EAP Type eap-type Specifies the type of authentication to use on
the IP Phone.
For more information, see Chapter 6, the
section, “802.1x Support” on page 6-31.
Identity Identity identity Specifies the identity or username used for
authenticating the phone.
Note: The value you enter for this parameter
also displays in the Aastra Web UI at the path
Advanced Settings->
802.1x Support->General->Identity
For more information, see Chapter 6, the
section, “802.1x Support” on page 6-31.
Draft 1