Aastra Telecom 9143i Series IP Phone User Manual


  Open as PDF
of 1184
 
Operational Features
41-001160-03, Rev 00, Releaes 2.4 5-291
Configuring Operational Features
Enabling/Disabling Callers List
You can enable and disable user access to the Callers List on the IP phones using
the following parameter in the configuration files:
callers list disabled
Valid values for this parameter are 0 (enabled) and 1 (disabled). If this parameter
is set to 0, the Callers List can be accessed by all users. If this parameter is
set to 1, the IP phone does not save any caller information to the Caller List. For
6757i and 6757i CT phones, the "Caller List" option on the IP phone is removed
from the Services menu, and the Caller List key is ignored if pressed by the user.
Use the following procedures to enable/disable the Callers List on the IP phones.
Using the Callers List
Use the following procedure to access and use the Callers List.
Configuration Files
For specific parameters you can set in the configuration files for enabling/disabling the Callers List, see
Appendix A, the section, “Callers List Settings” on page A-124.
IP Phone UI
Step Action
1 On 9143i, 6753i, 6755i, 6757i, and 6757i CT:
Press the “Callers List” key on the phone to enter the Callers List.
On the 9480i, 9480i CT:
Press the “Services” key on the phone, and then select “Callers List” from the list of options.
2Use the
r and s to scroll through the line items in the Callers List.
To the left of a line item, a
b icon displays with the handset ON or OFF the receiver. The ON
receiver indicates the call came in as a missed call. The OFF receiver indicates the call came in and
was answered.
Draft 1