Filter
Top Products
Operational, Basic, and Advanced Parameters
A-52 41-001160-03, Rev 00, Release 2.4
IP Phone Administrator Guide
Time Server Settings
Parameter –
time server disabled
NTP Time Servers
(in Web UI)
Aastra Web UI Basic Settings->Preferences->
Time and Date Settings
IP Phone UI‘ Options->Preferences->
Time and Date->Time Servers
Configuration Files aastra.cfg, <mac>.cfg
Description Enables or disables the time server. This parameter affects the time
server1, time server2, and time server3 parameters. Setting this
parameter to 0 allows the use of the configured Time Server(s). Setting
this parameter to 1 prevents the use of the configured Time Server(s).
Note: For DHCP to automatically populate this parameter, your DHCP
server must support Option 66.
Format Integer
Default Value 0 (disabled)
Range 0 (disabled)
1 (enabled)
Example time server disabled: 0
Parameter –
time server1
Time Server 1
(in Web UI)
Aastra Web UI Basic Settings->Preferences->
Time and Date Settings
IP Phone UI‘ Options->Preferences->
Time and Date->Time Servers
Configuration Files aastra.cfg, <mac>.cfg
Description The primary time server's IP address or qualified domain name. If the
time server is enabled, the value for time server1 will be used to request
the time from.
Note: For DHCP to automatically populate this parameter, your DHCP
server must support Option 66.
Format IP address or qualified domain name
Default Value 0.0.0.0
Range Not Applicable
Example time server1: 192.168.0.5
Draft 1