Filter
Top Products
Creating an XML Application
F-66 41-001160-03, Rev 00, Release 2.4
IP Phone Administrator Guide
SetType Attribute Used with Configuration Object
The IP phones include an attribute, “setType”, to be used with the
AastraIPPhoneConfiguration XML object. The AastraIPPhoneConfiguration
object allows you to make configuration changes to the phone that take affect
immediately, without having to reboot the phone. The “setType” attribute
enhances the ability of the AastraIPPhoneConfiguration object to override locally
set configuration parameters, and parameters that persist across a reboot, allowing
the user to control how the configuration parameters are saved (locally, remotely,
or override).
The following table describes the values you can use with the “setType” attribute.
Values for “setType” Parameter Description
remote (default) Allows the configuration parameters to be
saved with the same precedence as the
server settings. This setting does not persist
through a reboot.
Note: This was the behavior of the phone
prior to Release 2.4.
local Allows the configuration parameters to be
saved with the same precedence as if you
configured them using the IP Phone UI or
Aastra Web UI. This setting persists
through reboots of the phone. The only way
to change this setting is via the IP Phone
UI, Aastra Web UI, or another local type
setting.
override Allows the configuration parameters to be
saved with the same precedence as server
settings. This setting does not persist
through a reboot and removes the local
setting.
Draft 1